Compressor Repair
8 309586R
Compressor Repair
Use Compressor Repair Kit, 234211.
Disassembly
1. Relieve Pressure, page 5.
2. Unplug sprayer.
3. Remove shroud (6 bolts).
4. Remove green
ground wire and
black, and white
wires to compressor.
5. Loosen fittings (A and B) and remove air line.
6. Using a socket wrench
with extension, loosen
bolts (3).
7. Tilt compressor forward
and remove from hous-
ing.
8. Thoroughly clean inside housing, removing dust and
debris.
Reassembly
1. Carefully position compressor in housing.
2. Replace bolts using socket wrench to tighten.
Torque to 85 in. lbs.
3. Reattach air lines to
compressor. Finger
tighten plus one full
turn, fittings (A and
B).
4. Reattach 3 wires to
compressor matching
green to green, black to
black and white to white.
5. Replace shroud. Tighten bolts (6).
1
2
3
4
5
6
ti3025a
ti3022a
ti2748a
ti2749a
A
B
ti3032a
bolt
bolt
bolt
CAUTION
Fan blades are very delicate and can be damaged very
easily. When removing or replacing compressor, do not
bump or jar shroud or fan blades.
TI3011a
To Next Page
Loading...
