Graco ThermoLazer ProMelt - Bead Dispenser Box; Adding Beads to SplitBead Hopper (All Models); ProMelt Overheating Protection

Front Screed Burner Assembly
3A1320L 31
3. Install gas manifold snap ring (75).
4. Install front screed housing (20) to screed housing.
Secure with fasteners (146).
5. Connect gas tubing to 45° elbow (32).
6. Connect gas supply hose (99) to propane tank.
7. Open manual gas shut-off valve on propane tank.
ti17073a
146
20
ti17072a
32
ti14411b
99
ti14127a