Graco True Airless ProLTS 190 User Manual

3A3529C
EN
FIRE AND EXPLOSION HAZARD
LTS 15/LTS 17 Models:
• Use only non-flammable or water-based materials, or non-flammable paint thinners. Do not use
materials having flash points lower than 100° F (38° C). This includes, but is not limited to, acetone,
xylene, toluene, or naphtha. For more information about your material, request Safety Data Sheet
(SDS) from the supplier.
• Spraying flammable or combustible materials in a factory or fixed location must comply with NFPA
33 and OSHA 1910.94(c) requirements in the USA and with all similar local regulations in other
countries.
Not approved for use in explosive atmospheres or hazardous locations.
For portable airless spraying of architectural paints and coatings.
Important Safety Instructions
Read all warnings and instructions in this manual, related manuals, and on the unit.
Be familiar with the controls and the proper usage of the equipment. Save these
instructions.

Graco True Airless ProLTS 190 Specifications

General

Type	Airless Paint Sprayer
Max Pressure	3000 PSI
Flow Rate	0.38 GPM
Hose Length	50 ft
Power Source	Electric
Horsepower	0.625 HP
Voltage	120V
Amperage	15A
Tip Size	0.015 inches
Motor Type	DC