765042196 Rev. 000 10
Electrical connection
Read the text below thoroughly before electrical connection.
The product is intended for connection to alternating current. The connection
voltage (V) and frequency (Hz) are shown on the name plate in the cabinet (see
Fi
. 8
. Onl
the supplied cord is to be used.
Never use an extension cord for this appliance!
If a wall socket is placed in a longer distance than the length of the supplied power
cord, contact an electrician to establish a wall socket within the range of the
supplied power cord.
If the product is defective, it must be examined by a skilled service technician
knowing the installed controller and experienced in servicing a CO2 cabinet.
In general, it must be examined by the company who has connected the product.
Fig. 5
To Next Page
Loading...
