765042196 Rev. 000 15
Cabinet light
On all cabinets, besides the MIDI glass door cabinets with internal light, the cabinet
light is placed on the cabinet outside, above the door. This light is operated by the
main controller which means that the way it works cannot be changed.
When the cabinet door is opened the light above the door is turned on. When closing
the door again, the cabinet light above the door will remain on for two minutes.
These two minutes are a main function in the Danfoss controller which cannot be
adjusted. Two minutes after closing the door the light will switch off.
Switching the internal light (Only on MIDI KG/FG products)
On Midi glass door cabinets the cabinet LED strips are placed inside the cabinet
storage room. The light can be operated in two different ways:
1. When the cabinet door is opened the light above the door is turned on. When
closing the door again, the cabinet light above the door will remain on for two
minutes. These two minutes are a main function in the Danfoss controller
which cannot be adjusted. Two minutes after closing the door the light will
switch off.
2. By switching the light main switch in the left front of the top control box,
placed behind the top panel, to the position showing a light bulb, the internal
light will be turned on constantly.
To Next Page
Loading...
