765042196 Rev. 000 21
How to display the HA and HF alarms
• Press Prg/mute and DOWN simultaneously
• Scroll the list of alarms pressing UP and DOWN
• Press Set to select the required alarm
• Use UP or DOWN to see the description of the alarm: year, month,
day, hours, minutes and duration in minutes of the selected alarm
• Press Prg/mute again to return to the previous list.
In addition, the HACCP alarm menu allows the following operations:
How to delete a HACCP alarm
• Press Set & DOWN for 5 seconds when displaying the list of alarms.
This causes the HACCP to flash, the display
shows the message rES and the monitoring of HACCP alarms is
reinitialised
How to delete the entire memory of HACCP alarms
• Press Set & UP & DOWN for 5 seconds.
This procedure displays the message rES, deletes the entire memory of alarms and
reinitialises the monitoring of the
HACCP alarms.
In order to be able to use the HACCP alarms, it is necessary that the real time clock
has been adjusted by the installing company prior to handing over the cabinet to the
end user. These adjustments are protected by an access code and can therefore not
be made by the end user.
To Next Page
Loading...
