Allows each one of the 3 relays to be checked and
operated by the user.
Setting the upper and lower values for running the
“checkweigher” mode.
Value of the lower limit, including the decimal part.
Value for the upper limit, including the decimal
part.
Yes / No: Activating the limits control when
switching on the unit. The H-L key activates or
deactivates the limits control.
Setting of values for dosage.
Weight set point for speed 1.
Weight set point for speed 2.
Type of dosage. Loading (LOAd) or unloading
(unLOAd).
Yes / No: Activating the dosage mode when
switching on the unit.
To Next Page
Loading...
