18
Temperature regulation
The temperature in the refrigerator’s chamber can be set within
the temperature range from +2ºC up to +9ºC. When pressing and
holding the “COOL” button (5), the set temperature will be shown
on the display. When pressing the button (9) or button
(8) it is possible to modify the setting of the temperature inside the
refrigerator.
The temperature in the freezer’s chamber can be set within the
range from –25ºC up to –16ºC. When pressing and holding the
“FREEZE” button (6), the set temperature shall be shown on the
display. When pressing the button (9) or button (8) it is
possible to modify the setting of the temperature inside the freezer.
Every pressing of the button shall activate a brief acoustic signal. In
case of the power supply failure or disconnection of the power
supply to the fridge/freezer, the control will keep in the memory
the latest settings after the power supply has been restored.
Displaying of the temperature
You can decide which temperature should be shown on the
display - the temperature inside the refrigerator’s chamber (by
pressing the button (9)) or of the temperature inside the
freezer’s chamber (by pressing the button (8)). The above
mentioned setting can be changed at any time.
Temperature inside the fridge/freezer
The temperature settings and temperature values shown on the
display are average temperatures of the fridge/freezer. It concerns
both the refrigerator’s chamber and the freezer’s chamber. Do not
change the temperature setting simply because it is warmer in
summer. The increase of the room temperature will be detected by
the sensor and the compressor will automatically run for a longer
time to maintain the set temperature.
To Next Page
Loading...
Need help?
General
