19
Quick freezing
Quick freezing to a low temperature is important to maintain the
quality of the food products. Quick freezing is activated by
pressing and holding the function button “CFL” (10) and pressing
the “FREEZE” button (6). The blue light-emitting LED (14) switches
on signalling activation of the quick freezing function.
You can choose between freezing in 24 hours or 48 hours:
- by holding the function button “CFL” (10) and pressing once the
“FREEZE” button (6) you switch on the 24 hours quick freezing
function and “24” is shown in the display.
- by holding the function button “CFL” (10) and pressing twice the
“FREEZE” button (6) you switch on the 48 hours quick freezing
function and “48” is shown on the display.
- the next pressing of the button “FREEZE” (6) switches off the
quick freezing function and switches off the blue light-emitting
LED. The quick freeze function will be automatically disabled after
24 or 48 hours.
After pressing the quick freezing function button, the indication
“24” or “48” is displayed for 5 seconds. Afterwards the real
temperature inside the refrigerator’s chamber and freezer’s
chamber will be shown on the display.
It is recommended to switch on the quick freezing function (24 or
48 hours) for approximately 2 hours before loading the freezer’s
chamber with large quantities of food products.
Brief temperature variations
Brief temperature variations are normal and may occur when the
refrigerator is going through it’s automatic defrost cycle, when
fresh food has just been placed inside or when the door is open for
a longer time. These variations will not affect the food products
and the temperature will quickly return to the set-point level.
The interior light switches on when the door of the refrigerator’s
chamber has been opened. When the door remains open, the
interior light switches off after approximately 3 minutes. The
display will show E4 alarm and the acoustic alarm will be activated.
Please refer to page 22 to remedy.
To Next Page
Loading...
Need help?
General
