119
Electronics
Electronics
The following is a basic overview of the audio/visual (A/V)
electronics operation. The information in this section is written
for original factory-installed equipment usage. Refer to the
manufacturer’s user guides included in your Owner Information
Package for detailed operating instructions for each specific
component, or visit that manufacturer’s website.
If there have been modifications or replacements made to your
RV, then these instructions may not apply. Please contact the
service center or technician who performed the modifications or
substitutions if assistance is required.
Audio/Visual System Guide
Radio operation:
1. Turn ON the radio.
2. Select speaker output using the controls on the radio face.
CD operation
1. Turn ON the radio.
2. Select speaker output using the controls on the radio face.
3. Insert CD to play.
TV operation
1. Turn on the TV power supply.
2. Turn on the TV and select your signal input using
the “source” button.
3. Adjust the TV Antenna/Channel Tuning as needed.
◦ See page 121, TV Roof Antenna.
DVD operation
1. Turn o the TV power supply.
2. Turn ON the radio (the TV speakers are not used).
3. Insert DVD to play.
4. Turn on the TV and select your signal input using the
“source” button.
5. Select speaker output using the controls on the radio
face (the TV speakers are not used).
The TV power supply
should be turned OFF
when connecting and/or
disconnecting the cables
to the power supply and
antenna, but should be
turned ON when testing for
voltage.
To Next Page
Loading...
Need help?
General
