Grandstream Networks DP720 Quick Installation Guide

CHANGE THE BASE PIN CODE
1) Press Menu (left softkey or the
selection key ) to bring up
operation menu.
2) Use arrow keys to reach Settings
3) Navigate to select System Settings,
and then press “Select” (lef t softkey ).
4) Enter the current code PIN (By
Default is 0000),anew window will be
displayed inviting you to enter the new
password, when done press “Save” (left
softkey) andaprompt message will be
displayed to confirm that the new code
PIN has been saved successfully.
SELECT THE MENU
LANGUAGE
1) Press Menu (left softkey or the
selection key ) to bring up
operation menu.
2) Use arrow keys to reach Settings .
3) Navigate to select Phone language,
then select the desired language and
press “Select” (Left softkey ). The
LCD screen prompts “Change phone
language to xxx (xxx it’ the language
you selected)”
4) Press “Yes” (left softkey ) to
accept the change.
DATE AND TIME
1) Press Menu (left softkey or the
selection key ) to brin
g up
operation menu.
2) Use arrow keys to reach Settings .
3) Navigate to Date and time.
4) Edit the current values in the Date &
Time fields (you can change the date /
time format using the left key or
right key and press “Set” (left
softkey).
5) Press “Save” softkey to apply your
changes.
CALL OPERATIONS
MAKEACALL
• Method 1:
- Via default outgoing line:
1) Enter the desired number using the
keypad.
2) Press Dial key or Speaker key
the handset will use the default
outgoing line to dial out.
3) To terminate the call, press Hang-
Up key .
- Selecting the outgoing line:
1) Enter the desired number using the
keypad.
2) Press the left softkey “Call” .
3) Select the desired line to dial out.
4) To terminate the call, press Hang-
Up key .
• Method 2:
1) Press Dial key or Speaker key
to enter the pre- dialing screen.
2) Enter the number to dial using the
keypad or choos
eacontact from
phonebook list.
3) Press Dial key , # (Use#as dial
key” must be configured in web
configuration) or wait for 4 seconds
and the call will be initiated
automatically.
4) To terminate the call, press Hang-
Up key .
Note: To dial “+” please keep pressing
“0” key for about 2 seconds.
6

Grandstream Networks DP720 Specifications

General

Brand	Grandstream Networks
Model	DP720
Category	IP Phone
Language	English