3) Press the left softkey “Save” after
Enabling / Disabling the auto answer
option.
DIRECT IP CALL
Elements necessary to complete a
Direct IP Call:
• Both DP720 and other VoIP Device,
have public IP addresses, or
• Both DP720 and other VoIP Device
are on the same LAN using private IP
addresses, or
• Both DP720 and other VoIP Device
can be connected througharouter
using public or private IP addresses
(with necessary port forwarding or
DMZ).
Users can perform IP calls using Star
code following the below steps:
1) Pick up the handset and press Dial
key .
2) Dial *47 followed by the target IP
Address.
Note: You can enter directly *47 +
target IP address, and then press the
dial key to initiate the call.
CALL TRANSFER
The DP720 supports two call transfer
types :
Blind transfer and Attended transfer
• Blind Transfer
1) Press the “Options” softkey (Lef t
softkey) duringacall, and then select
Transfer.
2) The initial call will be on hold, enter
the number o
r select the handset you
want to transfer the call to.
3) Press Dial key . The call is
connected to the number or the
handset you specified, and the LCD
screen prompts Call Transferred.
• Attended Transfer
1) Press Left softkey “Options” during
a call, and then select New call.
2) Choose the line and enter the
number you want to transfer the call
to, then press Dial key .
3) Once the second call is established,
press left softkey “Option” and select
Transfer.
3-WAY CONFERENCE
The DP720 supports creatingalocal
conference with other parties
(including handset starting the
conference).
To starta3Way conference, follow
below steps:
1) Press the Dial key to place a
call to the first party.
2) Press left softkey “Options” ,
then select Conference
3) Enter the number of the second
party you want to add to the
conference and press Dial Key .
4) To drop the conference call, press
or “End” softkey .
Note: Conference
can b
e bridged
before third party answers.
8
To Next Page
Loading...
Need help?
General
