ANSWER CALLS
When receiving an incoming call, you
can answer the call using following
steps:
• Earpiece mode:
Press Dial Key to pick up the call,
or “Accept” softkey (left softkey ).
• Speakerphone mode:
Press Speaker Key to pick up
the call.
• Headset mode:
Press Dial Key to pick up the call,
or “Accept” softkey (left softkey )
usingaconnected headset.
Note:
To answer an incoming call during an
established call, press Dial Key , or
the Speaker Key , or the
“Answer” softkey.
The incoming call is
answered, and the original call is placed
on hold. You can switch off the ringer
temporarily by pressing Silent softkey.
END CALLS
To terminate the calls, press Hang-Up
key .
REJECT CALLS
To reject an incoming calls, press
Hang-Up key or “Reject” softkey
(right softkey ).
ACTIVATE/DEACTIVATE
HANDSFREE MODE
• Press the Hands free key while
you are makingacall or on the idle
screen to activate hands free mode.
• Press the Hands f
ree key again
to deactivate the hands free function.
MUTE THE MICROPHONE
• Press the Mute key to switch
off the microphone during an
established call. You can now talk
freely without the other party hearing
you and the icon of mute will be
displayed on the screen.
• Press Mute key again to switch
the microphone back on.
ADJUST SPEAKER AND
EARPIECE VOLUME
Press left key or right key while
you are on an established call to set
the volume of the earphone/speaker.
You can choose between 5 different
levels.
SELECT OUTGOING LINE
1) Press Menu (left softkey or
the selection key to bring up
operation menu.
2) Access Call settings >
Outgoing Default Line.
3) The LCD screen displays all
outgoing lines currently assigned to
the handset. Default outgoing line is
highlighted with green button
•
,
select the desired line and press
“Select” softkey.
AUTO ANSWER
The auto answer feature works only if
the handset is placed in the charger
cradle.
To activate/
deactivate the auto
answer feature
1) Press Menu (left softkey or
the selection key to bring up
operation menu.
2) Use arrow keys to reach Call settings
, and navigate to Auto answer
using the Up/Down keys arrow.
7