This Configuration Guide is written as general guide on how to configure the Grandstream
device model DP750 to work with PBXware 4.1.3.
Video Tutorial
Video tutorial explaining Auto Provisioning setup for Grandstream Phone on PBXware 4.
Video tutorial explaining Auto Provisioning setup for Grandstream Phone on PBXware 5.
Requirements
Identifying device model
To start and successfully complete registration of your Grandstream device you need to know
which device model you will setup.
From the back of each Grandstream device there are exact model information that you should
check. Although different device models can have exactly the same requirements and
installation procedure, device models can also have significantly different requirements and
installation procedure, so that ignorance of your own model may result in the inability to
successfully set up your device.
Device firmware
Make sure that your device is loaded with appropriate firmware version, 1.0.3.23.
■
To find out the firmware version of your Grandstream device model open a new browser
■
window and enter your device IP address in order to access the device web administration
interface login screen. Example: http://192.168.1.22.
Login to device web administration interface with your username and password. Please note,
■