- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
Click Save button.
■
Click on Dect in the top menu.
■
Click on SIP Account Settings in the left menu.
■
SIP User ID
■
PBXware extension number, example 1003.
Authenticate ID
■
Usually the same number as the SIP User ID.
Password
■
The Secret of the extension as received in the e-mail associated with this extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
extension.
Click on the Save and Apply button.
■
If everything is done as above described, you should have successfully registered your device
■
to PBXware. Dial *123 to verify registration.
Auto Provisioning
This chapter describes how to set UAD settings, create PBXware extension and register the
device using DHCP or Static IP address.
The following topics are covered:
UAD Settings
■
Creating Extension
■
Registering device
■
UAD Settings
To Next Page
Loading...
