Grandstream Networks GDS370 Series User Manual

Figure 32: GSC3570 Configuration Example
Door opening with SIP Call
When GSC3570 established a call with GDS370x, the screen will display the virtual open door button(s), and the user will press
the button to open the door:
Figure 33: Open Door with SIP Call
Door opening without SIP Call
At the GSC3570 idle screen, press “Monitor →Door system”, and the related GDS370x will be displayed. In the blue bar, left is
a “Phone” icon and right is the “Open door” icon. The“Phone” icon will establish the SIP call as the previous firmware behaved.
Press the “Open door” icon, and the GSC3570 will open the door directly and NO SIP CALL will be established. Depending on
how many doors are controlled, if one door is configured, the door will open directly; if two doors are configured, another
screen will pop up to allow the user to choose which door to open, as shown below:

Grandstream Networks GDS370 Series Specifications

General

Brand	Grandstream Networks
Model	GDS370 Series
Category	Intercom System
Language	English