Maintenance Settings
This page shows the GDS370x Maintenance parameters.
Upgrade
This page contains the upgrade parameters of the GDS370x.
Figure 77: Upgrade Page
Upgrade Via Selects the upgrade method (HTTP, HTTPS).
Firmware Server Path Configures the IP address or the FQDN of the upgrade server.
Config Server Path Configures the IP address or the FQDN of the configuration server.
HTTP/HTTPS User Name User name if needed by remote provisioning HTTP/HTTPS server.
HTTP/HTTPS Password Password to authenticate with remote provisioning HTTP/HTTPS server.
Firmware File Prefix Prefix that will be added when requesting firmware file.
Firmware File Postfix Postfix that will be added when requesting firmware file.
Click “Email Test” after configuration, if settings are correct, a test email will send out and “E-mail test successfully” message
on the top page will appear .