Grandstream Networks GDS370 Series User Manual

Call Out
Account
Select the SIP account that will be used to call the SIP Number extension, when choosing Auto, the unit will
use the first available SIP account.
Cellphon
e
Configures the cellphone of the user.
Group Specifies to which group the user will be added.
Schedule Specifies the schedule that will be assigned to the user.
Right of
Card
and
Private
PIN
Select the doors that can be accessed by the user.
Enable
When checked, the user’s RFID and Private PIN will be active for door opening. If unchecked, the Private PIN
nor RFID card swipe won’t take effect.
Table 8: Card Info
Add Users Automatically
If [Enable Card Issuing Mode] is checked, the GDS3705 keypad will start blinking and once an RFID card is swiped, data stored
on the card will be added to the GDS3705 card management page, user can still edit the entry added automatically by
modifying some fields.
Users Operation
Click on to edit the entry or show details of the entry.
Select the entries and click on to delete the selected users.
Click to refresh the data entered to the GDS3705.
Users can use to navigate through User Management pages.
Group
The Group page permits to manage the groups which will contains multiple users, click on to create new
groups or to edit existing groups or to delete the group.
Note: Users can create up to 50 groups.
Note
Group overrides Schedule.
If Schedule is set as “Disabled” the RFID Card will be accepted when swiped.
Note
The following configuration is exclusive to the GDS3705 Model.

Grandstream Networks GDS370 Series Specifications

General

Brand	Grandstream Networks
Model	GDS370 Series
Category	Intercom System
Language	English