Enable
OpenVP
N®
Enables/disables OpenVPN® functionality and requires the user to have access to an OpenVPN® server.
Note: To use OpenVPN® functionalities, users must enable OpenVPN® and configure all of the settings related
to OpenVPN®, including server address, port, OpenVPN® CA, certificate and key. Additionally, the user must
also set the SIP account to use “VPN” for the “NAT Traversal” (under Account 🡪 Network Settings).
OpenVP
N®
Server
Address
Defines the URL/IP address for the OpenVPN® server.
OpenVP
N® Port
Defines the network port for the OpenVPN® server. The default setting is 1194.
OpenVP
N®
Transpo
rt
Determines network protocol used for OpenVPN® (UDP or TCP).
The default setting is TCP.
OpenVP
N® CA
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication purposes. Press “Upload” to
upload the corresponding file to the device.
OpenVP
N®
Client
Certifica
te
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication purposes. Press “Upload” to
upload the corresponding file to the device.
OpenVP
N®
Client
Key
OpenVPN® Client key (*.key) required by OpenVPN® server for authentication purposes. Press “Upload” to
upload the corresponding file to the device.
OpenVP
N®
Cipher
Method
The cipher method of OpenVPN®, must be the same cipher method used by the OpenVPN® server. Supported
methods are: Blowfish, AES-128, AES-256 and Triple-DES.
OpenVP
N®
Userna
me
Configures the OpenVPN® authentication username (optional).
OpenVP
N®
Passwor
d
Configures the OpenVPN® authentication password (optional).
To Next Page
Loading...
