EasyManuals Logo
Home>Grandstream Networks>IP Phone>GRP260 Series

Grandstream Networks GRP260 Series User Manual

Grandstream Networks GRP260 Series
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
P a g e | 100
GRP260x Administration Guide
Version 1.0.3.42
6. Update the changes and reboot the phone.
End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server.
Custom Ringtones Provisioning
The custom ringtones can be provisioned fron the link configured under the firmware server path, up to 6
ringtones can be customized. The phone will be looking for ringx.ogg as shown below, where x can be from
1 to 6:
Figure 9: Custom ringtone provisioning
Note: Users can use the link https://convertio.co/wav-ogg/ in order to generate the .ogg file but kindly make
sure of the below settings before converting the .wave file to .ogg file:
Codec: must be Opus
Frequency: 16K
Audio Channel: Mono
Phone Provisioning
Configuration File Download
Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File
(binary or XML) through TFTP, FTP/FTPS or HTTP/HTTPS. The "Config Server Path" is the TFTP,
FTP/FTPS or HTTP/HTTPS server path for the configuration file.
It needs to be set to a valid URL, either in FQDN or IP address format. The "Config Server Path" can be
the same or different from the "Firmware Server Path".
A configuration parameter is associated with each field in the web configuration page. A parameter consists
of a Capital letter P and 2 to 5-digit numeric numbers. i.e., P2 is associated with the "New Password" in the
Web GUISystem SettingsSecurity Settings User Info Management Admin Password. For a
detailed parameter list, please refer to the corresponding configuration template.
When the GRP260x series boots up or reboots, it will issue a request to download an XML file named
"cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address of the phone, i.e., "cfg000b820102ab"
and "cfg000b820102ab.xml". If the download of "cfgxxxxxxxxxxxx.xml" file is not successful followed by a
configuration file named "cfgxxxxxxxxxxxx", the phone will issue a request to download a specific model
configuration file “cfg<model>.xml”, where <model> is the phone model, i.e., cfggrp2601.xml” for the
GRP2601, “cfgrp2602” for the GRP2602, “cfgrp2603” for the GRP2603 and “cfgrp2604” for the GRP2604.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GRP260 Series and is the answer not in the manual?

Grandstream Networks GRP260 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelGRP260 Series
CategoryIP Phone
LanguageEnglish

Related product manuals