Grandstream Networks GRP260 Series User Manual

P a g e | 80
GRP260x Administration Guide
Version 1.0.3.42
Enable EDRC
Feature
Enable EDRC feature, the remote party will not hear the environmental noise
during a call, this option can either be set to High Shielding or to Soft
Shielding.
System Settings → TR-069
Enable TR-069
Enables TR-069
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
Default setting is: https://acs.gdms.cloud
TR-069 Username
ACS username for TR-069.
TR-069 Password
ACS password for TR-069.
Periodic Inform
Enable
Enables periodic inform. If set to “Yes”, device will send inform packets to the
ACS. The default setting is “No”.
Periodic Inform
Interval
Sets up the periodic inform interval to send the inform packets to the ACS.
Default is 86400.
Connection Request
Username
The username for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
Connection Request
Port
The port for the ACS to connect to the phone.
CPE SSL Certificate
The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key
The Cert Key for the phone to connect to the ACS via SSL.
Start TR-069 at
Random Time
When enabled, TR-069 will send out first INFORM message to server on
randomized timing between 1 to 3600 seconds after phone boots up.
Maintenance Page Definitions
Table 14: Maintenance Page Definitions
Maintenance → Upgrade and Provisioning
Firmware
Upgrade via Manually Upload
Upload Firmware File
to Update
Upload and start upgrade firmware.
Upgrade via Network
Firmware Upgrade via
Allows users to choose the firmware upgrade method via TFTP, HTTP or
HTTPS.
Firmware Server Path
Defines the server path for the firmware server.

Grandstream Networks GRP260 Series Specifications

General

Brand	Grandstream Networks
Model	GRP260 Series
Category	IP Phone
Language	English