Grandstream Networks GRP260 Series - Saving Configuration Changes; Rebooting from Remote Locations

P a g e | 33
GRP260x Administration Guide
Version 1.0.3.42
Saving Configuration Changes
After users makes changes to the configuration, press the "Save" button will save but not apply the changes
until the "Apply" button on the top of web GUI page is clicked. Or users could directly press "Save and
Apply" button.
Rebooting from Remote Locations
Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely. The
web browser will then display a reboot message. Wait for about 1 minute to log in again.