GRP260x Administration Guide
Version 1.0.3.42
for provisioning and can be found on the label coming with original box and
on the label located on the back of the device.
Displays the status of PPPoE Link.
The configured address type: DHCP, Static IP or PPPoE.
The IPv4 address obtained on the phone.
Displays the Gateway of the phone.
Displays the IPv4 NAT Type.
Displays the IPv6 Address Type (Auto-configured or Statically configured).
Displays the Global Unicast Address.
Displays the Link-Local Address.
Displays the IPv6 Static Gateway.
Displays the IPv6 DUID (DHCP Unique Identifier) if Address Type is “Auto-
configured”
Displays the IPv6 NAT Type.
Displays the WLAN MAC Address.
Displays the SSID where the phone is connected via Wi-Fi.
Displays the country code of the phone.
Displays the IPv4 Address Type (DHCP, Static or PPPoE)
Displays the actual IPv4 Address on the phone.
Displays the Gateway of the phone.
Displays the IPv4 NAT Type.
Displays the IPv6 Address Type (Auto-configured or Statically configured).
Displays the Global Unicast Address.
Displays the Link-Local Address.
Displays the IPv6 Static Gateway.
Displays the IPv6 DUID (DHCP Unique Identifier) if Address Type is “Auto-