GRP260x Administration Guide
Version 1.0.3.42
Enter the IPv6 prefix length when Full Static is used in “Statically configured”
IPv6 address type.
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically
configured" IPv6 address type.
Enter the DNS Server 1 for IPv6.
Enter the DNS Server 2 for IPv6.
Enter the Preferred DNS Server for IPv6.
Allows the user to enable/disable 802.1X mode on the phone. The default
value is disabled. To enable 802.1X mode, this field should be set to EAP-
MD5, users may also choose EAP-TLS, or EAP-PEAPv0/MSCHAPv2.
Enter the Identity information for the 802.1x mode.
Note: Letters, digits and special characters including @ and – are accepted.
Enter the MD5 Password for the 802.1X mode.
Note: Letters, digits and special characters including @ and – are accepted.
Uploads / deletes the 802.1X CA certificate to the phone; or delete existed
802.1X CA certificate from the phone.
802.1X Client Certificate
Uploads / deletes 802.1X Client certificate to the phone; or delete existed
802.1X Client certificate from the phone.
Network Settings → Wi-Fi Settings (GRP2602W Only)
Enables / Disables the Wi-Fi on the phone. Three options are available:
• Enable: Enables Wi-Fi to connect to Wi-Fi network.
• Disable: Disables Wi-Fi. User has ability to enable Wi-Fi from LCD
Menu.
• Disable & Hide Menu from LCD: Disables Wi-Fi and hides “Wi-Fi
Settings” menu from phone LCD.
Set the type of Wi-Fi Band whether its 2G or 5G or 5G&2G.
Configures Wi-Fi country code.
This parameter sets the ESSID for the Wireless network. Press "Scan" to scan
for the available wireless network. Click on "Connect" and enter the
authentication credentials of the Wi-Fi network to connect to. Users can
connect to hidden networks by pressing on “Add Network” and configure:
• ESSID: Configure the hidden ESSID name.
• Security Mode: Defines the security mode used for the wireless network
when the SSID is hidden. Default is “None”.
To Next Page
Loading...
Need help?
General
