park/pick up the call.
• LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Description field. It could be the same or different from the Base
in LDAP configuration under Advanced Settings. The Base in LDAP
configuration will be used if the Description field is left blank. Enter the
LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is:
“dc=grandstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
• Conference
Allow user to set their Multi-Purpose Key to “Conference” mode to trigger
a conference.
By setting the extension number in the value box, the users will be able to
activate a 3-way conference by simply press the assigned MPK button.
• Multicast Paging
Allows the user to configure the address to send a multicast page to.
• Call Log
Select Account and enter account number in the Value field to allow
configuration of call log for other extension.
• Monitored Call Park
Select account from Account field and enter the call park extension in the
Value field to park/pick up the call, and also monitor the parked call via
Line Key’s light.
• Menu
Select this feature in order to display the Menu from the MPK buttons, no
field dis required for configuration.
• Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the MPK
To Next Page
Loading...
Need help?
General
