GRP260x Administration Guide
Version 1.0.3.42
as “abc@gmail.com” for “jid” of XMPP protocol. If it is specified, username
and domain will be overridden.
Configures the event, which will trigger an outbound notification.
Configures the name of the destination where the outbound notification will
be sent to.
Configures the subject of Email notification. This option is only applicable to
SMTP protocol and it is not editable for other protocols.
Configures the message body or the outbound notification.
Configure extra attribute’s name reserved for specific attributes for a given
notification in the future.
Configures extra attribute’s value reserved for specific attributes for a given
notification in the future.
Maintenance → Voice Monitoring
VQ RTCP-XR Session
Report
When enabled, phone will send a session quality report to the central report
collector at the end of each call.
VQ RTCP-XR Interval
Report
When enabled, phone will send an interval quality report to the central report
collector periodically throughout a call.
VQ RTCP-XR Interval
Report Period
Configure the interval (in seconds) of phone sending an interval quality report
to the central report collector periodically throughout a call.
Warning Threshold for
Moslq
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a warning
alert quality report to the central report collector.
Critical Threshold for
Moslq
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a critical
alert quality report to the central report collector.
Warning Threshold for
Delay
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
Critical Threshold for
Delay
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a critical alert quality report to the central report collector.