Figure 12 : Key mode configured as account mode
Key mode setting can be configured from the phone’s Web GUI → Phone Settings → Call Settings.
Completing Calls
There are several ways to complete a call.
• On hook dialing. Enter the number when the phone is on hook and then send out.
1. When the phone is in idle, enter the number to be dialed out;
2. Take handset off hook, or Press Speaker button, or Press Headset button with headset plugged in.
3. The call will be dialed out.
• Off hook and dial. Off hook the phone, enter the number, and send out.
1. Take handset off hook; or
• Press Speaker button; or
• Press Headset button with headset plugged in; or
• Press an available LINE key to activate speaker;
2. You shall hear dial tone after off hook;
3. Enter the number;
4. Press SEND or # keys to dial out.
• Predictive dialing. When dialing numbers, based on the entered digit, the phone will predict and list
the candidates of target number.
If the target number is already saved in phonebook or call history, when entering the first several digits, the
phone will display a list of matching numbers. If the target number appears on the list, user could select the
number using Up/Down key and dial out. GRP260x has predefined call feature code (the first digit is *).
To Next Page
Loading...
Need help?
General
