P a g e | 107
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
LDAP search result.
This field allows the users to configure multiple space separated number
attributes.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server.
If set to 0, server will return all search results. The default setting is 50.
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Specifies whether the searching result is sorted or not.
Default setting is "No".
Configures to enable LDAP number searching when dialing and receiving
calls.
Configures the display name when LDAP looks up the name for incoming
call or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description
With LDAP Lookup Incoming call, Outgoing call selected, DUT will performs
LDAP search during incoming and outgoing call. If exact match search
enabled, during the LDAP search, DUT will only get the result that matches
the search input exactly. i.e. if 100 is the incoming/outgoing number only
100 will get searched, *100* will not. Default is “disabled”.
To Next Page
Loading...
Need help?
General
