P a g e | 120
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
Example 2 - Destination 2 with protocol SMTP and 3 extra Attributes
configured:
P9911=serverName=destination2&protocol=SMTP&serverAddress=smtp
s://smtp.gmail.com&port=465&user=username2&password=password2&
from=username2&to=to2&domain=&extraAttrName1=extraAttrValue1&e
xtraAttrName2=extraAttrValue2&extraAttrName3=extraAttrValue3
The highlighted strings in above examples are the actual values
configured in each field for the destination.
Notification
After configuring destination server, users can configure notification information under phone’s web
UISettingsOutbound NotificationNotification. Click on “Add Notification” and users will see
following window to configure notification.
Figure 11: Action URL - Add Notification
Table 21: Action URL – Notification Options
Configures the event, which will trigger an outbound notification.
Configures the name of the destination where the outbound notification
will be sent to.
Configures the subject of Email notification. This option is only applicable
to SMTP protocol and it is not editable for other protocols.
To Next Page
Loading...
Need help?
General
