P a g e | 14
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
CHANGE LOG
This section documents significant changes from previous versions of user manuals for
GRP261x/GRP2624/GRP2634. Only major new features or major document updates are listed here. Minor
updates for corrections or editing are not documented here.
Firmware Version 1.0.5.48
No major changes.
This is the initial version for GRP261x/GRP2624/GRP2634.
Firmware Version 1.0.5.45
No major changes.
Firmware Version 1.0.5.44
No major changes.
Firmware Version 1.0.5.36
Added support for a power-saving feature of turning off the LCD display automatically according to a
configurable schedule. [Office Hour]
Added support for a power-saving feature of turning off the LCD display automatically according to a
timer when not during office hours. [Power Saving Timeout]
Added support for using variables on the configuration server path. [Config Server Path][Firmware
Server Path]
Firmware Version 1.0.5.33
Added support for choosing between RTCP and RTCP-XR. [Enable RTCP]
Added support for Blacklist/Whitelist IP addresses for web access. [Web Access Control]
Added support for disabling the feature of selecting an account from LCD. [Select account from LCD]
Added “Disable Active MPK Page” option for GRP2614/2616, before it only existed for GRP2615.
[Disable Active MPK Page]
Extended the amount of text that can be displayed on the Extension label. [Use Long Label]
Allows use of Primary SIP server URI in REGISTER for both Primary and Secondary SIP servers
Firmware Version 1.0.5.15
Added support to provision new config file “dev[MAC ADDRESS].cfg”. [Configuration File Download]
Added option to adjust Call Tone Volume. [Call Tone Volume]
Added ability to enable EDRC feature. [Enable EDRC Feature]
Line status indicator on LCD will now show account name while VPK label on LCD will show VPK
To Next Page
Loading...
Need help?
General
