Grandstream Networks GRP261 Series Administration Guide

P a g e | 51
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
type. The default setting is “Standard”.
Broadsoft
Broadsoft Call Center
When set to “Yes”, a Softkey “BSCCenter” is displayed on LCD. User can
access different Broadsoft Call Center agent features via this Softkey.
Please note that “Feature Key Synchronization” will be enabled regardless
of this setting. Default setting is “Disabled”.
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
Hoteling Event
Broadsoft Hoteling event feature. Default setting is “Disabled”. With “Hoteling
Event” enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” softkey.
Call Center Status
When set to “Yes”, the phone will send SUBSCRIBE to the server to obtain
call center status. The default setting is “Disabled”.
Broadsoft Executive
Assistant
When enabled, Feature Key Synchronization will be enabled regardless of
web settings.
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it’s
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. Default is “Disabled”.
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call
Park notifications. The default setting is “Disabled”.
VQ RTCP-XR
VQ RTCP-XR Collector
Name
Configures the host name of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
VQ RTCP-XR Collector
Address
Configures the IP address of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
VQ RTCP-XR Collector
Port
Configure the port of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages. Default is “5060”.
Enable RTCP
Enables user to select to use RTCP, RTCP-XR, or disable the feature.
Account x  SIP Settings  Session Timer
Enable Session Timer
This option is used to enable or disable session timer on the phone side
when server side can provide both session timer UPDATE or session audit
UPDATE. The default setting is “No”.
Session Expiration
The SIP Session Timer extension (in seconds) that enables SIP sessions to
be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE). If
there is no refresh via an UPDATE or re-INVITE message, the session will
be terminated once the session interval expires. Session Expiration is the
time (in seconds) where the session is considered timed out, provided no

Grandstream Networks GRP261 Series Specifications

General

Brand	Grandstream Networks
Model	GRP261 Series
Category	IP Phone
Language	English