Grandstream Networks GRP261 Series Administration Guide

P a g e | 76
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
Notification Tone
Volume
Configures notification tone volume.
The valid range is 0 to 7 and default setting is 5.
Call Tone Volume
Used to configure the call tones’ level in dB. Values range from -15 to 15.
Lock Speaker Volume
Lock volume adjustment when the option is enabled so it cannot be changed
from phone LCD. The option can be set to: “No”, “Ring”, “Talk” or “Both”.
Default setting is “No”.
Default Ringtone
Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this
setting. If the user wants the default ring tone to be used globally, he needs
to set the ring tone of each account to Default Ring Tone; Otherwise, it will
be whichever the ring tone you set.
Important: The Priority goes as: Contact Ring Tone  Account Ring Tone
 Default Ring Tone.
Settings  Programmable Keys  Virtual Multi-Purpose Keys Settings
Idle Screen Settings
Show Label
Background
If enabled, the VPK label’s background will match the status of the VPK and
will no longer be transparent.
The default setting is “No”.
Use Long Label
If enabled, the VPK label will extend as far as possible.
The default setting is “Yes”.
Call Screen Settings
Key Mode
If set to “Line Mode”, the amount of VPKs will be the amount of lines you can
have. If set to “Account Mode”, the lines will be grouped by account, so the
VPKs could hold more lines in one account.
For example, with line mode, when the line is in use, by pressing the VPK,
nothing is going to happen. In Account Mode, when the line is in use, by
pressing the VPK, a new line will be initiated.
The default setting is “Account Mode”.
Transfer Mode via VPK
Allows users to configure “Transfer” VPK to do either Blind or Attended
Transfer. They can also set their Transfer key to make a new call with the
configured number. The default setting is “Blind Transfer”.
Enable Transfer via
non-Transfer MPK
MPK with type BLF, Speed dial, etc. will perform as transfer MPK under
active call. The default setting is “No”.
Show Keys Label
 If set to “Show” side labels will be shown during calls.
 If set to “Hide”, side labels will be hidden during calls for more space to
display the user information.
 If set to “Toggle”, a softkey will appear so that users can click to
Show/Hide the side labels.

Grandstream Networks GRP261 Series Specifications

General

Brand	Grandstream Networks
Model	GRP261 Series
Category	IP Phone
Language	English