Grandstream Networks GRP261 Series Administration Guide

P a g e | 93
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
PC Port Priority Value
Assigns the priority value of the PC port. The valid range is 0 – 7. The default
value is 0.
Enable CDP
Enables/Disables CDP “Cisco Discovery Protocol”. The default setting is
“Enabled”.
Enable LLDP
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is “Enabled”.
LLDP TX Interval
Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. The default
setting is “60”.
Maximum
Transmission Unit
(MTU)
Defines the MTU in bytes. The valid range is 576 – 1500. The default value
is 1500 bytes.
Network  Remote Control
Action URI Support
Enables/disables action URI feature on the phone.
The default setting is “Enabled”.
Remote control Pop
up window support
Indicates whether the phone is enabled to pop up allow remote control.
The default setting is “Enabled”.
Action URI allowed IP
list
List of allowed IP address from which the phone receives action URI. The
Allowed IP addresses are separated by a comma such as
“192.168.1.1,192.168.1.2”. Set this field to “any” to allow any IP address to
send Action URL to the phone. The default value is empty string which means
no IP address is allowed for remotely control the phone.
CSTA Control
Indicates whether CSTA Control feature is enabled. Change of this
configuration will need the system to reboot to take effect. The default setting
is “Disabled”.
Network  Affinity Settings (GRP2614, GRP2615 & GRP2616 only)
Affinity Support
Allows communication with GS Affinity CTI application to manage telephone
calls from computer. If enabled, a reboot is required to establish the
communication. Default is “Disabled”.
GS Affinity CTI Application is available HERE and its User Guide HERE.
Preferred Account
Selects the account on which CTI support is enabled.
Network  Bluetooth Settings (GRP2614, GRP2615 & GRP2616 only)
Bluetooth Power
Configures Bluetooth to power “On”, “Off” or “Off & Hide Menu From LCD”.
If set “Off & Hide Menu From LCD”, Bluetooth will be disabled, and users will
not find Bluetooth settings on phone LCD Menu, while if set to “No”, Bluetooth
will be disabled, and Bluetooth Settings menu will be available, and user can
enable it. The default setting is “On”.

Grandstream Networks GRP261 Series Specifications

General

Brand	Grandstream Networks
Model	GRP261 Series
Category	IP Phone
Language	English