Grandstream Networks GXP1625 Administration Guide

GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 37
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.
• Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be used
if the phone receives SIP INVITE with Alert-Info header in the following
format: Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming caller
ID or Alert Info matches the rule, the phone will ring with the selected ring.
Ring Timeout
Defines the timeout (in seconds) for the rings on no answer. The default setting
is 60 seconds.
Send Anonymous
If set to “Yes”, the “From” header in outgoing INVITE messages will be set to
anonymous, essentially blocking the Caller ID to be displayed.
Anonymous Call
Rejection
If set to “Yes”, anonymous calls will be rejected. The default setting is “No”.
Auto Answer
If set to “Yes”, the phone will automatically turn on the speaker phone to answer
incoming calls after a short reminding beep.
Allow Auto Answer by
Call-Info
If set to “Yes”, the phone will automatically turn on the speaker phone to answer
incoming calls after a short reminding beep, based on the SIP info header sent
from the server/proxy. The default setting is “No”.
Custom Call-Info for
Auto Answer
Used in addition to match the contents of the info parameter in the Call-Info
header for auto answer.
Refer-To Use Target
Contact
If set to “Yes”, the “Refer-To” header uses the transferred target’s Contact
header information for attended transfer. The default setting is “No”.
Transfer on
Conference Hangup
Defines whether or not the call is transferred to the other party if the initiator of
the conference hangs up. The default setting is “No”.
Disable Recovery on
Blind Transfer
Defines whether to enable/disable recovery to the call to the transferee on failing
blind transfer to the target.
No Key Entry
Timeout(s)
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
Use # as Dial Key
Allows users to configure the “#” key as the “Send” key. If set to “Yes”, the “#”
key will immediately dial out the input digits. In this case, this key is essentially
equivalent to the “Send” key. If set to “No”, the “#” key is included as part of the
dialing string.
DND Call Feature On
Configures the DTMF sequence sent to the server when pressing DND key to
turn on DND feature.
DND Call Feature Off
Configures the DTMF sequence sent to the server when pressing DND key to
turn off DND feature.

Grandstream Networks GXP1625 Specifications

General

Brand	Grandstream Networks
Model	GXP1625
Category	IP Phone
Language	English