EasyManuals Logo

Grandstream Networks GXP1625 Administration Guide

Grandstream Networks GXP1625
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 45
For example, if the phone is off hook and account 2 is active, it will call the
configured Speed Dial number using account 2.
Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension number
in the Value field to be monitored. (Supported only on GXP1628/GXP1630)
Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects the
information from the phones and sends it out in one single notify message.
PBX server has to support this feature. (Supported only on
GXP1628/GXP1630)
Presence Watcher
This option has to be supported by a presence server and it is tied to the
"Do Not Disturb" status of the phone's extension. (Supported only on
GXP1628/GXP1630)
Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during the call.
"Enable MPK Sending DTMF" has to be set to "Yes" first.
Voice Mail
Select Account and enter the Voice Mail access number in the Value field.
Call Return
The last answered calls can be dialed out by using Call Return. The Value
field should be left blank. Also, this option is not binding to the account and
the call will be returned based on the account with the last answered call.
Transfer
Select Account, and enter the number in the Value field to be transferred
(blind transfer) during the call.
Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call. (Supported only on GXP1628/GXP1630)
Intercom
Select Account, and enter the extension number in the Value field to do the
intercom.
LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Name field. It could be the same or different from the Base in
LDAP configuration under Advanced Settings. The Base in LDAP
configuration will be used if the Name field is left blank. Enter the LDAP
Name/Number filter in the Value field. LDAP search does not support
entering Non-ASCII characters
Multicast Paging
This option is for multicast sending. Enter Line key description in

Table of Contents

Other manuals for Grandstream Networks GXP1625

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GXP1625 and is the answer not in the manual?

Grandstream Networks GXP1625 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGXP1625
CategoryIP Phone
LanguageEnglish

Related product manuals