GXP17xx Administration Guide
Displays the type of NAT connection used by the phone.
Displays the status of NAT connection for each account on the phone.
Product model of the phone.
Boot: boot version number.
Core: core version number.
Base: base version number.
Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone.
Locale: locale version number.
Recovery: recovery version number.
IP Geographic
Information
City: displaying city.
Language: displaying language.
Time Zone: displaying time zone.
System up time since the last reboot.
Current system time on the phone system.
GUI and Phone service status.
Displays the core dump file when available and which could be downloaded for
troubleshooting purpose.
Accounts Page Definitions
Table 6: Account Page Definitions
Account x General Settings
Indicates whether the account is active. The default setting is "Yes".
Configures name associated with each account to be displayed on the LCD.
Specifies the URL or IP address, and port of the SIP server. This should be
provided by VoIP service providers (ITSP).
Specifies the URL or IP address, and port of the SIP server. This will be used
when the primary SIP server fails.
Configures the IP address or the domain name of the primary outbound proxy,
media gateway or session border controller. It's used by the phone for firewall
or NAT penetration in different network environments. If a symmetric NAT is
detected, STUN will not work and only an outbound proxy can provide a
solution.
Configures secondary outbound proxy which will be used when the primary