Grandstream Networks GXP1760 Administration Guide

P a g e | 33
GXP17xx Administration Guide
Mute Key Functions
While Idle
Specifies the function of mute key in idle. Default setting is “DND”. When select
“Idle Mute” and press Mute key while idle, the future incoming call will be answered
with mute. When select “Disabled”, Mute key will not take effect while idle. The
default setting is “No”.
Disable Transfer
Disables the Transfer function. The default setting is "No".
In-call dial number
on pressing transfer
key
Configures the number for the phone to dial as DTMF during the call using TRAN
button.
Auto-Attended
Transfer
If set to "Yes", the phone will use attended transfer by default. The default setting
is "No".
Do Not Escape #
as %23 in SIP URI
Specifies whether to replace # by %23 or not for some special situations. The
default setting is "No".
Click-To-Dial
Feature
Enables Click-To-Dial feature. If this feature is enabled, user could click the green
dial button on left top corner of phone’s Web GUI, then choose the account and
dial to the target number. The default setting is "Disabled".
Call History Flash
Writing: Write
Timeout
Defines the interval (in seconds) to save the call history to phone's flash. 0
means this option is disabled. The default value is 300 seconds.
Max Unsaved Log
Defines the number of unsaved logs before written to phone's flash. 0 means
this option is disabled. The default value is 200 entries.
Default call log type
This option is used for users to set the default call log list after select
MENUCALL HISTORY. Broadsoft Call Log or Local Call Log option will only
show its own list. Default option will keep both call log lists.
Return Code When
Refusing Incoming
Call
Send selected type of SIP message to the call when refusing the incoming call.
Return Code When
Enable DND
Send selected type of SIP message when enabling DND.
Local Call
Recording Feature
Enables/Disables the ability to record calls locally while on the call screen. The
default setting is "Disabled"
Saved Local Call
Recording Location
Defines the location where the recordings will be stored, either on the internal
storage or on the connected USB. Default setting is “Internal Storage”
Download Local Call
Recordings
When there are recordings presented, you may download them here.
User-Agent Prefix
Configure the prefix in the “User-Agent” header.
Settings  Multicast paging
Paging Barge
During active call if incoming multicast page is higher priority (1 being the highest)
than this value the call will be held and multicast page will be played. The default

Grandstream Networks GXP1760 Specifications

General

Brand	Grandstream Networks
Model	GXP1760
Category	IP Phone
Language	English