GXP17xx Administration Guide
Configures the date/time used on the phone according to the specified time zone.
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead (when daylight
saving) which is U.S central time. If it is positive (+) if the local time zone is west
of the Prime Meridian (A.K.A: International or Greenwich Meridian) and negative
(-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3
rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6 (for Sun, Mon, Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of April to
the 1st Sunday of November.
Configures the date display format on the LCD. The following formats are
supported:
yyyy-mm-dd: 2012-07-02
mm-dd-yyyy: 07-02-2012
dd-mm-yyyy: 02-07-2012
dddd, MMMM dd: Friday, October 12
MMMM dd, dddd: October 12, Friday
The default setting is yyyy-mm-dd.
Configures the time display in 12-hour or 24-hour format on the LCD. The default
setting is in 12-hour format.
Use Auto Location
Service
Enables / disables auto location services on the phone. Default setting is “Yes”.
Settings XML Application
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. The default setting is
"No".
Download Screen
XML at Boot-up
If set to "Yes", the idle screen XML file will be downloaded when the phone boots
up. The default setting is "No".
Specifies the custom file for the idle screen XML file to be downloaded.
Idle Screen XML
Server Path
Configures the server path to download the idle screen XML file. This field could
be IP address or URL, with up to 256 characters.
To Next Page
Loading...
Need help?
General
