Grandstream Networks UCM6208 Configuring

P a g e | 6
Configuring UCM6XXX with GXW410X
Create Peer SIP TRUNK On UCM6XXX
On the UCM6XXX web GUI, create a peer SIP trunk under Extension/Trunk ->VOIP Trunks. In this example,
the GXW410X IP address is 192.168.5.159.
Figure 2: Create Peer SIP Trunk on the UCM6XXX
Configure Outbound Rule On UCM6XXX
On the UCM6XXX web GUI, go to Extension/Trunk ->Outbound Routes to create a new outbound rule. This
would allow the extension on the UCM6XXX to reach numbers in PSTN network via the peer SIP trunk we just
configured.

Grandstream Networks UCM6208 Specifications

General

Brand	Grandstream Networks
Model	UCM6208
Category	PBX
Language	English