Spare Parts
27
9 Spare Parts
9.1 Spare Parts
Figure 9-1: Pressure Reducing Valve
(Cartridge and Strainer) - 3 bar
Figure 9-3: Inlet Manifold including
pressure reducing valve, expansion
relief valve
Figure 9-5: Flexible Hose
Figure 9-2: Tundish
Figure 9-6: Expansion Vessel
Part Name Part No.
Pressure Reducing Valve - 3 bar GCS32
Expansion Relief Valve - 6 bar GCS08
Flexible Hose -
3
/4" BSPF x
3
/4" BSPM GCS02
1
/2" Temperature & Pressure Relief Valve 90˚C/7 bar GCS09
Tundish - 15mm/22mm Compression GCS10
Coil Control/Limit Thermostat GCS11
Immersion Heater Element - Cotherm type ELE14-IN-800-UNV GCS30
Drain Cock GCS14
Immersion Heater Thermostat - Cotherm type TSE GCS31
Motorised Valve GCS16
Expansion Vessel 19 litre nominal (170, 200 & 250 models)* (18 litre actual vol) -
3
/4" BSPM connection GCS24
Expansion Vessel 24 litre nominal (300 model)* (22 litre actual vol) -
3
/4" BSPM connection GCS25
Expansion Vessel 35 litre nominal (400 model)* (35 litre actual vol) -
3
/4" BSPM connection GCS28
Expansion Vessel 50 litre nominal (500 model)* (50 litre actual vol) - 1" BSPM connection GCS27
1" BSPF x
3
/4" BSPM Adaptor - for 35 litre Expansion Vessel GCS33
Inlet Manifold c/w 3 bar Pressure Reducing Valve and 6 bar Expansion Relief Valve GCS07
*All pre-charged to 3 bar
DuoWave Indirect Cylinder Spare Parts
Figure 9-4: Expansion Relief Valve
(Complete) - 6 bar
To Next Page
Loading...