To Next PageTo Next Page
Need help?Do you have a question about the Grant EUROFLAME 50/90 and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Output | 50-90 kW |
| Fuel Type | Oil |
| Installation Type | Floor Standing |
| Heat Exchanger Material | Steel |
Provides basic information about the boiler's function and automatic operation.
Details how to access and identify the boiler's control panel elements.
Step-by-step guide for safely igniting the boiler and ensuring proper startup.
Instructions for safely switching off the boiler for short or long periods.
Troubleshooting steps for common issues when the burner does not ignite.
Information on the types of fuel suitable for the boiler and important handling notes.
Guidance on boiler thermostat settings, lock-out reset, and safety thermostat operation.
Specifies the required electrical supply voltage, frequency, and fuse rating.
Explains the requirements and considerations for operating the boiler on a sealed heating system.
Presents detailed specifications, dimensions, and performance data for various boiler models.
Provides specific technical data and performance figures for kerosene-fired models.
Details technical data and performance for gas oil-fired models.
Illustrates physical dimensions and connection points for different boiler models.
Overview of the Euroflame boiler range, types, outputs, and flue options.
Lists essential regulations, British Standards, and OFTEC requirements for installation.
Describes the packaging and contents for different boiler models and flue kits.
Covers fuel storage requirements, tank positioning, and fuel pipe system configurations.
Details the mains electrical supply requirements, earthing, and fuse protection.
Explains the importance and requirements for adequate air supply for combustion and ventilation.
Provides guidance on installing and maintaining conventional flue systems for optimal performance.
Step-by-step instructions for connecting a conventional flue pipe to the boiler.
Describes various balanced flue kits, extensions, and their installation considerations.
Recommendations for preventing frost damage to the boiler and heating system.
Guidelines for selecting a suitable location and ensuring adequate clearances for the boiler.
Details on making high-level flow and low-level return water connections for different models.
Specific instructions for making water connections on system boiler models.
Illustrates different heating system configurations and water flow diagrams.
Diagrams and notes for installing a fully pumped heating system.
Information on requirements and components for sealed heating systems.
Instructions for safely removing the boiler and its components from packaging.
Guidance on preparing the wall, including hole-making for balanced flue installations.
Details on fitting high level and vertical balanced flue systems and accessories.
Step-by-step guide for fitting the burner to Boiler House models and balanced flue air tubes.
Instructions for connecting the boiler's electrical power supply to the control system.
Procedure for connecting the flexible fuel line to the boiler's oil pump.
Steps for filling and venting sealed heating systems, including expansion vessel checks.
Key checks and safety precautions before commencing boiler servicing.
Procedure for safely dismantling the boiler's casing and components for servicing.
Instructions for cleaning the boiler's internal components, baffles, and flue path.
Detailed steps for cleaning the combustion head, electrodes, nozzle, photocell, fan, and pump filter.
Illustrates the electrical connections for the control panel of Kitchen/Utility models.
Shows the electrical wiring for the control panel of System boilers.
Wiring diagram for dual thermostats used in Boiler House models.
Examples of wiring diagrams for various control systems, including Honeywell.
Flowchart and notes for diagnosing and resolving faults with the Riello RDB burner.
Lists common boiler faults and their corresponding remedies for troubleshooting.
An illustrated breakdown of the Riello RDB burner components with part numbers.
