Need help?Do you have a question about the Grant Vortex Series and is the answer not in the manual?
General| Heat Exchanger Material | Stainless Steel |
|---|---|
| Boiler Type | Condensing |
| Model | Vortex Pro |
| Central Heating Flow Temperature Range | 30°C to 80°C |
| Max Working Pressure | 3 bar |
| Electrical Supply | 230V, 50Hz |
| Efficiency | Up to 93.3% (depending on model) |
| Expansion Vessel | Integrated |
Lists specific settings for the burner, including nozzle and pressure.
Outlines mandatory regulations and standards for boiler installation.
Step-by-step instructions for physically installing the boiler unit.
Essential requirements for operating the boiler within a sealed central heating system.
Instructions for connecting the main electrical power supply to the boiler.
Pre-commissioning checks to ensure safety and correct setup.
Detailed steps for setting up and adjusting the burner.
Detailed instructions for cleaning the burner head, nozzle, and related parts.
Steps for correctly setting the burner diffuser position for optimal combustion.
Basic troubleshooting steps and initial checks for common issues.
Detailed fault-finding procedures for central heating and hot water issues.
Flowchart-based troubleshooting for burner-specific problems.
Diagnosing faults using the pump's LED indicator and fault table.
Diagnosing pump faults using LED indicators and troubleshooting procedures.
To Next Page