29
Grant Euroflame Condensing External Modules
6 - BOILER INSTALLATION
Burner components
6.10
Fig. 16 - RDB burner components
1 Pump
2 Control box
3 Reset button with lock-out lamp
4 Flange with gasket (do not remove from boiler)
7
8
1
2
3
5
4
6
5 Air damper adjustment screw
6 Air supply tube connection (balanced flue)
7 Pump pressure adjustment screw
8 Pressure gauge connection
Note:
Remove the factory fitted air inlet spigot adaptor (item 6, above) from the air intake on
the top right hand side of the burner and fit the grey plastic air inlet grille in its place.
See Note below
To Next Page
Loading...
