Grant JB Nova Series - User Manual

Questions and Answers

A
Alexander HernandezAug 9, 2025
Why temperature continues to rise when not expected in Grant Laboratory Equipment?
- J
  Jason GrantAug 9, 2025
  If the temperature continues to rise unexpectedly in your Grant Laboratory Equipment, it may be because the set temperature is higher than the liquid temperature. Ensure the bath set temperature is correct. Alternatively, the set temperature might be too close to the ambient temperature. In this case, increase the set temperature, keeping in mind that the minimum temperature should be 5°C above ambient.
W
William JonesAug 17, 2025
How to resolve if temperature does not rise when expected in Grant Laboratory Equipment?
- M
  Melvin DennisAug 17, 2025
  If the temperature in your Grant Laboratory Equipment isn't rising as expected, the set temperature might be lower than the liquid temperature. Verify that the bath set temperature is correct. Also, if the set temperature is too close to ambient, increase it, noting that the minimum temperature should be 5°C above ambient.
S
sanderswilliamAug 25, 2025
What to do if Grant Laboratory Equipment display shows '????'?
- J
  Joshua OlsenAug 26, 2025
  If the Grant Laboratory Equipment display shows '????', it could indicate a faulty temperature probe. A competent person should check the probe for an open or short circuit fault, or contact Grant.
J
joshua48Sep 1, 2025
What to do if the Grant Laboratory Equipment display shows '???'?
- A
  amanda56Sep 1, 2025
  If the Grant Laboratory Equipment display shows '???', it means that the bath is running on its default settings. Contact Grant Instruments' Service Department for assistance.