Background Settings:
107
Chapter 6: Background Settings
This chapter discusses your plotter’s background settings.
NOTE: Your settings are registered in the plotter’s internal memory and retained even
when the plotter is turned off.
This menu can be accessed by two methods.
Method 1:
• Press the MENU key to select MENU MODE.
• Press the NEXT key until you get to BACKGROUND SETTING menu.
• Press the F2 key to select BACKGROUND SETTING menu.
Method 2:
• Turn the power on while pressing the DOWN ARROW key; the Menu selection
display then appears.
There are two different menu sequences. Each of them belongs to GP-GL and
HP-GL commands.
When the plotter is turned on, the following menu sequence appears if GP-GL is
selected as the plotter’s data command:
This menu sequence appears if HP-GL is selected as the plotter’s data com-
mand:
.
BACKGROUND SETTINGS>.
OPTION 1>.
OPTION 2>.
LANGUAGE SELECTION
[ ENGLISH ]
.
V 1.12 GL
V 1.12 HL
To Next Page
Loading...