3
Product Information
On Receipt of the Kahuna Maverik Control Surface
The equipment is supplied in dedicated packaging provided by the manufacturer and should
not be accepted if delivered in inferior or unauthorized materials.
• Carefully unpack the system components and check them against the packing list.
If there is anything incorrect notify your Grass Valley Partner, or Grass Valley, at once.
• Check that the equipment has not been damaged in transit. If any damage has
occurred notify your Grass Valley Partner (or Grass Valley directly) and the carrier
immediately.
• Always retain the original packing materials if possible, they could prove useful should
it ever be necessary to transport or ship the system units.
• Always read the installation guide and the user instructions (separate manual) care-
fully, it will provide you with helpful hints and tips about care and maintenance and
help you get the most out of your Kahuna Maverik control surface.
In the unlikely event of an equipment failure, contact your Grass Valley Partner, or Grass
Valley, at once, contact details are at the rear of this manual.
What is supplied with Kahuna Maverik
The Kahuna Maverik packaging is split into two categories:
• The MAVRow Frames
• The MAV Modules and Accessories
The boxes with the MAVRow frames will contain:
• MAVRows
• Spacer Bars - if supplied (to connect the MAVRows together)
• Screws (to attach the MAVRows to the Spacer Bar)
• Cable Tie Brackets and plastic fasteners (to attach the Comms cables)
• A3 Assembly Instructions
The box that contains the MAV Modules will contain:
• The individually packed MAV Modules
• Accessories box - PSU’s, Cables (mains for the PSU’s), Cables (Comms), MAVRow
Ears and USB Memory device
To Next Page
Loading...
