24
Environment and Location
Mounting the Mav Remote
Mounting the Mav Remote
There are three ways to mount the Mav Remote:
•Desk Mount
• Half Rack Mount (with rack mount tray as support)
• Rack Mount using 2x Mav Remote units with a joining plate
Desk Mount
The rack mount ear mounting brackets can be set to two different positions, horizontal with
the mounting holes facing upwards, and vertically (for Rack Mount as described in the 19""Rack
Mount description), this will allow the unit to be secured to the underside of a desk
Half 19" Rack Mount
The mounting brackets may also be set to a vertical position to fit the unit into a 19" rack, the
unit is 1RU high and only half 19" wide, so will need to have support from below using a rack
mount tray, as only one side of the unit can be secured to the rack sides.
With the rack mount ears
in the horizontal position,
the unit can be secured to
a desk using 4x screws
Mounting the unit to the
underside of a desk
The unit is secured to the
rack on one side only.
Support for the unit
with a rack tray
To Next Page
Loading...
