34
Cabling and Connections
Mav Remote Connections
Mav Remote Connections
The Mav Remote is a rack mountable/desk top hardware element that provides a means of
control to the Grass Valley switcher range.
Essentially the Mav Remote enables control of the video hardware from a remote location away
from the main control surface. It allows engineering to remotely control a mainframe,
operators to have a smaller means of control when used with MAV modules.
• The Mav Remote has 2 external PSU connectors, one PSU can power the MAV-GUI, the
other PSU is for redundancy.
• The Mav Remote has a network port which connect directly to the switcher mainframe.
• The Mav Remote has 8x Comms ports and can have up to 16 individual MAV modules
connected to it.
Mav Remote Connections
The “Monitor” connector takes a mini HDMI lead. To make sure that the lead stays in place,
there is a cable tie fitted to secure the body of the HDMI lead to a plate above the connector
socket (as shown below).
6 Comms Ports
to connect to MAVs
on the control surface
Network Port to
connect to the
switcher mainframe
External PSU
Connectors
MON (Monitor) Connector
2 USB Connectors
2 Comms Ports
to connect to MAVs
on the control surface
Fit the HDMI lead to the Monitor port.
Then pull the cable tie to secure the
lead to the plate.
To Next Page
Loading...
