EasyManuals Logo

Grasshopper 124V/48 User Manual

Grasshopper 124V/48
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
The Start Circuits will keep engine from
starting unless:
Both steering levers are swung out in their
neutral locked position, and
The PTO switch is down in it’s disengaged
position.
The Kill Circuits will stop the running engine
if:
The operator raises off the seat any time
during operation of the machine with PTO
engaged or steering levers in operating
position.
The steering levers are in their operating
position and the park brake lever is moved
into engaged locked (up) position.
The park brake is set and the steering
levers are moved into their operating po-
sition.
The operator is off the seat and the steer-
ing levers are moved into their operating
position.
The operator is off the seat and the PTO
switch knob is pulled up to its engaged
position.
Do not operate this machine un-
less all safety systems are working
properly as described above.
Fig. 3
PRE-START CHECK LIST
Maintain desirable operational standards and
help ensure the safety of the operator by rou-
tinely checking the following on a daily basis:
Walk around the machine and visually
check for loose or missing components.
Make sure all components are mounted
properly and are in good working condi-
tion.
Make sure all fenders, guards and shields
are safely and securely attached.
Make sure the discharge shield or restric-
tion plate is installed at the discharge
opening on the mower deck.
Make sure all safety decals are clearly
readable (see page 7).
Check hydrostatic transmission uid level.
DO NOT operate machine with low uid.
Low uid could cause damage to trans-
mission and loss of control of the machine.
Check engine oil level (refer to “Engine
Manual” for proper level and type of oil
used).
Never attempt to check oil while en-
gine is running.
Check for oil and fuel leaks.
Clean rotating air intake screen on en-
gine. When mowing in dusty conditions,
dry grass or long grass, it may be neces-
sary to frequently clean rotating air intake
screen to prevent engine overheating.
Never attempt to clean rotating air
intake screen while engine is run-
ning.
Check air cleaner (refer to “Engine Manu-
al”). When mowing in dusty conditions, dry
grass or long grass, it may be necessary
to frequently clean the foam pre-cleaner
and paper cartridge.
Make sure the engine is free of dirt and
debris.
Check fuel level. Refer to “Engine Manu-
al” for correct fuel for your requirements.
CAUTION
WARNING
WARNING

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grasshopper 124V/48 and is the answer not in the manual?

Grasshopper 124V/48 Specifications

General IconGeneral
BrandGrasshopper
Model124V/48
CategoryLawn Mower
LanguageEnglish

Related product manuals