Need help?Do you have a question about the Grasshopper 721D2 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Fuel Capacity | 12 gallons |
| Turning Radius | Zero-turn |
| Engine | Diesel |
| Deck Lift | Hydraulic |
Key safety and warranty information for the operator.
Technical specifications for the engine.
Power Take-Off specifications.
Details on the transmission system.
Steering system specifications.
Operating speed ranges.
Fuel tank volume.
Specifications for tire dimensions.
Physical dimensions of the tractor.
Symbol meanings.
Decals related to safety and operation of the traction kit.
Common safety decals.
More safety decals.
Identification of fuse ratings and locations.
Diagram of steering lever positions.
Noise level information.
Noise power level information.
General safety rules for operation.
Importance of operator training and manual reading.
Pre-operation checks for safety.
Safe practices for handling gasoline.
Guidelines for safe operation of the machine.
Safety procedures during maintenance tasks.
Proper methods for storing equipment.
Conversion of measurements.
Torque values for bolts.
Identifying and using controls and switches.
List of checks before starting.
Procedure to test safety interlocks.
Steps for starting the engine.
Precautions for uneven ground.
How to move the unit without the engine.
Procedures for stopping the engine.
How to operate steering levers.
Fluid and lubricant capacities.
Recommended tire pressures.
Drive system maintenance.
Engine oil and filter service.
Cooling system maintenance.
Procedures for battery care.
How to change drive system fluids.
How to check drive system fluid.
Diagnosing drive system power loss.
Adjusting for neutral position issues.
Procedure for neutral adjustment.
Steps for replacing drive belts.
Adjusting the fuel shut-off solenoid.
Procedure to test the fuel solenoid.
Guide to diagnosing engine starting problems.
Procedure for adjusting parking brake.
Steps to remove and replace the clutch.
Procedure for clutch burnishing.
Adjusting steering levers.
Adjusting traction spring tension.
Removing mower deck.
Information on required rear weights.
To Next Page
